VLE 2-post lifts

Ideal for service and repair work under the vehicle or on wheels. Robust, multi-functional and hand wearing.

 

The VLE 2-post electro-mechanical lifts are a range of high quality lifts, offering a lifting capacity up to 3000 kg or 4000 kg. They are ideal for lifting from small cars up to commercial vehicles with long wheelbase. Some versions are ground-free mounted lifts. One important feature is their user-friendly push button controlled raising and lowering process (except the VLE 2130E, with reversing switch). The versions without mechanical connection feature an Electric controlled automatic synchronization. One other important specification is the minimum pad height of only 85 mm on lifts without chassis. Versions with a chain drive are also offered, with one model with a self-bearing chassis, especially made to be installed in week grounds. These lifts meets all the legal specifications and safety requirements in force in the E.U.

 

 

The VLE 2130 is an entry-level model offering the best possible quality. All operations are controlled with user-friendly push buttons and a main switch. The protection of the car is ensured by rubber pads on the carriage unit for  the vehicle doors, as well as a full coverage of the lifting screw to avoid any risk of oil spills. Everything possible has been done to reduce maintenances operation, such as the use high quality bronze bearing nuts, with automatic lubrication.

Some noticeable performances are the lifting time 45s, the great lifting height of 2005 mm, or the min. pick-up pad of only 85 mm.

  • For passenger cars and small commercial vehicles up to 3000 kg.
  • Very reliable chain drive, without cable bridge
  • Good value for money

 

2-post electro-mechanical lift 3000 kg with self-bearing chassis and asymetric arm for passenger cars

 

The VLE 2130F is fitted with a self-bearing chassis for installation on weak grounds. All operations are controlled with user-friendly push buttons and a main switch. The protection of the car is ensured by rubber pads on the carriage unit for  the vehicle doors, as well as a full coverage of the lifting screw to avoid any risk of oil spills. Everything possible has been done to reduce maintenances operation, such as the use high quality bronze bearing nuts, with automatic lubrication.

Some noticeable performances are the lifting time 45s, the great lifting height of 2005 mm, or the min. pick-up pad of 100 mm

  • Self bearing chassis for installation on slab with concrete thickness only 130 mm (quality C20/25)
  • Pick-up pad min. height : 100 mm
  • Other specifications as VLE2130

 

2-post electro-mechanical lift 3000 kg without mechanical connection, for passanger cars

 

The VLE 2130E offers 2 motors each 2,5 kW. Therefore, there is no mechanical connection between the columns; the ground remains free of any obstacle. Its lifting arms are in 2-part as a basic execution. The protection of the vehicle's doors is done by the mean of rubber pads fitted on the carriage units. The bearing nuts are made of composite materials, lubricated with grease. 

Some noticeable performances are the lifting time in 50 seconds, the great lifting height of 2000 mm, and the pick-up pad min. height of 85 mm

  • Lift without mechanical connection (easy access)
  • Economical solution
  • Energy-saving through smaller EL-motors

 

2-post electro-mechanical lift 3000 kg without mechanical connection., with additional features for user friendlyness and low maintenance for passenger cars and small commercial vehicles

 

The 2130EL offers 2 motors each 3 kW. Therefore, there is no mechanical connection between the columns, the ground remains free of any obstacles. In addition, this lift offers an energy set, consisting in a plug 230V and 2 air plugs. All operations are controlled with user-friendly push buttons and a main switch. Everything possible has been done to reduce maintenances operation, such as the use high quality bronze bearing nuts, with automatic lubrication. The protection of the car' doors is ensured by rubber pads on the carriage unit. In addition, a full coverage of the lifting screw avoids any risk of oil spills. In order to offer a full compatibility not only with cars, but also with small commercial vehicles, the asymmetric lifting arms are in 3-part front / 2-part rear.

Some noticeable perfomances are the lifting time in 45 secondes, the great lifting height of 2005 mm, and the pick-up pad min. height of 85 mm.

  • Lift without mechanical connection (easy access)
  • User friendly and Low maintenance
  • Energy-kit